Here are some useful updates for improved security and stability in your Stereo Hub and Silverback speakers.
The update to Stereo Hub applies to firmware versions lower than 12123. Check in Google Home that the firmware in your Stereo Hub is lower than 12123 before making the update.
If your Stereo Hub already has firmware version 12123 installed, you don’t need to update it.
Below you will find updates for:
Stereo Hub
SA legend 5 silverback
SA legend 7 silverback
SA legend 10 silverback
SA legend 40 silverback
SA legend 60 silverback
How to update Stereo Hub
Download this file to your computer
Save the file on a USB stick. Make sure that it is the only file on the USB stick
Turn off your Stereo Hub (remove power)
Insert the USB key into the Service (USB) input of the Stereo Hub
Press constantly on the Pairing button
Connect power to Stereo Hub (keep pressing the Pairing button)
Wait a few seconds
The WiSA LED on the bcak flashes slowly from 2 to 7 times
The WiSA LED stops flashing
The WiSA LED then flashes quickly
Disconnect power from Stereo Hub
Remove the USB stick
Reconnect the power. Wait 2 minutes
Go to the Google Home App and set-up your device
Take the power off. Wait 10 seconds
Re-connect power. Let Stereo Hub make a complete start-up (= constant light in WiFi LED on the front)
Disconnect power. Wait 10 seconds
Re-connect power. The LED on the front will now flash in different sequences. Do nothing until the front LED has a constant light
Check in Google Home that the new firmware version is 12013
Now, pair the Stereo Hub with the remote control
Click on the Pairing button for 7-9 seconds
Note that the WiSA-LED starts flashing quickly
Press twice on any button on the remote control
Note, the WiSA-LED stops flashing
Stereo Hub and remote control are paired.
How to update SA legend 5 silverback
Download this file to your computer
Save the file on a USB stick. Make sure that this is the only file on the USB stick
Turn off the loudspeaker
Press constantly on the Connect button
Turn on the loudspeaker (keep pressing the Connect button)
Note, that LEDs light up, moving once in a slow circle (release the Connect button)
Insert USB stick
Note, that LEDs light up quickly in a circle
Turn off the loudspeaker
Remove the USB stick
The loudspeaker is now updated.
How to update SA legend 7 silverback
Download this file to your computer
Save the file on a USB stick. Make sure that this is the only file on the USB stick
Turn off the loudspeaker
Press constantly on the Connect button
Turn on the loudspeaker (keep pressing the Connect button)
Note, that LEDs light up, moving once in a slow circle (release the Connect button)
Insert USB stick
Note, that LEDs light up quickly in a circle
Turn off the loudspeaker
Remove the USB stick
The loudspeaker is now updated.
How to update SA legend 10 silverback
Download this file to your computer
Save the file on a USB stick. Make sure that this is the only file on the USB stick
Turn off the loudspeaker
Press constantly on the Connect button
Turn on the loudspeaker (keep pressing the Connect button)
Note, that LEDs light up, moving once in a slow circle (release the Connect button)
Insert USB stick
Note, that LEDs light up quickly in a circle
Turn off the loudspeaker
Remove the USB stick
The loudspeaker is now updated.
How to update SA legend 40 silverback
Download this file to your computer
Save the file on a USB stick. Make sure that this is the only file on the USB stick
Turn off the loudspeaker
Press constantly on the Connect button
Turn on the loudspeaker (keep pressing the Connect button)
Note, that LEDs light up, moving once in a slow circle (release the Connect button)
Insert USB stick
Note, that LEDs light up quickly in a circle
Turn off the loudspeaker
Remove the USB stick
The loudspeaker is now updated.
How to update SA legend 60 silverback
Download this file to your computer
Save the file on a USB stick. Make sure that this is the only file on the USB stick
Turn off the loudspeaker
Press constantly on the Connect button
Turn on the loudspeaker (keep pressing the Connect button)
Note, that LEDs light up, moving once in a slow circle (release the Connect button)
Insert USB stick
Note, that LEDs light up quickly in a circle
Turn off the loudspeaker
Remove the USB stick
The loudspeaker is now updated.
Learn in this video how to update your Silverback speakers
This update is included in all Silverback speakers and Stereo Hubs delivered from the System Audio factory after January 30, 2020