Here are some useful updates for improved security and stability in your Stereo Hub and Silverback speakers.
The update to Stereo Hub applies to firmware versions lower than 12013. Check in Google Home that the firmware in your Stereo Hub is lower than 12013 before making the update.
If your Stereo Hub already has firmware version 12013 installed, you don’t need to update it.
Below you find updates for:
- Stereo Hub
- SA legend 5 silverback
- SA legend 7 silverback
- SA legend 10 silverback
- SA legend 40 silverback
- SA legend 60 silverback
How to update Stereo Hub
- Download this file to your computer
- Save the file on a USB stick. Make sure that it is the only file on the USB stick
- Turn power off your Stereo Hub (cut power)
- Insert USB stick into the Service input (USB) of the Stereo Hub
- Press constantly on the Pairing button
- Connect power to Stereo Hub (keep pressing the Pairing button)
- Wait a few seconds
- The WiSA LED on the bcak flashes slowly from 2 to 7 times
- The WiSA LED stops flashing
- The WiSA LED then flashes quickly
- Disconnect power from Stereo Hub
- Remove the USB stick
- Re-connect power. Wait 2 minutes
- Go to the Google Home App and set-up your device
- Take the power off. Wait 10 seconds
- Re-connect power. Let Stereo Hub make a complete start-up (= constant light in WiFi LED on the front)
- Disconnect power. Wait 10 seconds
- Re-connect power. The LED on the front will now flash in different sequences. Do nothing until the front LED has a constant light
- Check in Google Home that the new firmware version is 12013
Stereo Hub is updated.
Now, pair the Stereo Hub with the remote control
- Click on the Pairing button for 7-9 seconds
- Note that the WiSA-LED starts flashing quickly
- Press twice on any button on the remote control
- Note, the WiSA-LED stops flashing
Stereo Hub and remote control are paired.
How to update SA legend 5 silverback
- Download this file to your computer
- Save the file on a USB stick. Make sure that this is the only file on the USB stick
- Turn off the loudspeaker
- Press constantly on the Connect button
- Turn on the loudspeaker (keep pressing the Connect button)
- Note, that LEDs light up, moving once in a slow circle (release the Connect button)
- Insert USB stick
- Note, that LEDs light up quickly in a circle
- Turn off the loudspeaker
- Take out the USB stick
The loudspeaker is now updated.
Learn in this video how to update your Silverback speakers
How to update SA legend 7 silverback
- Download this file to your computer
- Save the file on a USB stick. Make sure that this is the only file on the USB stick
- Turn off the loudspeaker
- Press constantly on the Connect button
- Turn on the loudspeaker (keep pressing the Connect button)
- Note, that LEDs light up, moving once in a slow circle (release the Connect button)
- Insert USB stick
- Note, that LEDs light up quickly in a circle
- Turn off the loudspeaker
- Take out the USB stick
The loudspeaker is now updated.
Learn in this video how to update your Silverback speakers
How to update SA legend 10 silverback
- Download this file to your computer
- Save the file on a USB stick. Make sure that this is the only file on the USB stick
- Turn off the loudspeaker
- Press constantly on the Connect button
- Turn on the loudspeaker (keep pressing the Connect button)
- Note, that LEDs light up, moving once in a slow circle (release the Connect button)
- Insert USB stick
- Note, that LEDs light up quickly in a circle
- Turn off the loudspeaker
- Take out the USB stick
The loudspeaker is now updated.
Learn in this video how to update your Silverback speakers
How to update SA legend 40 silverback
- Download this file to your computer
- Save the file on a USB stick. Make sure that this is the only file on the USB stick
- Turn off the loudspeaker
- Press constantly on the Connect button
- Turn on the loudspeaker (keep pressing the Connect button)
- Note, that LEDs light up, moving once in a slow circle (release the Connect button)
- Insert USB stick
- Note, that LEDs light up quickly in a circle
- Turn off the loudspeaker
- Take out the USB stick
The loudspeaker is now updated.
Learn in this video how to update your Silverback speakers
How to update SA legend 60 silverback
- Download this file to your computer
- Save the file on a USB stick. Make sure that this is the only file on the USB stick
- Turn off the loudspeaker
- Press constantly on the Connect button
- Turn on the loudspeaker (keep pressing the Connect button)
- Note, that LEDs light up, moving once in a slow circle (release the Connect button)
- Insert USB stick
- Note, that LEDs light up quickly in a circle
- Turn off the loudspeaker
- Take out the USB stick
The loudspeaker is now updated.
Learn in this video how to update your Silverback speakers
See SA legend silverback speakers here
This update is included in all Silverback speakers and Stereo Hubs delivered from the System Audio factory after January 30, 2020
